|
How to
use Wright’s Copper Cream
| |
Apply with a clean, wet
cloth or enclosed sponge
Polish thoroughly
Add more water as needed
Rinse copper under running water
Dry with a clean, soft cloth
Rinse sponge in running water
Wring out sponge and store in jar |
For sensitive skin, wear rubber gloves. In case of
eye contact, flush with water. Body Copy]
Copper
Care Q&A
How can I clean heavily tarnished
copper?
On heavily tarnished copper not easily cleaned by vigorous
polishing, use a very fine steel wool (grade 000 or
finer). Though it may leave tiny scratches, these should
disappear with use.
How should I polish lacquered
copper?
Lacquer is a clear coating applied to some copper items
to minimize upkeep. If the piece remains bright and
shiny over time, it is probably lacquered and only requires
cleaning with a damp cloth. If the piece darkens over
time, it probably is not lacquered and can be polished
using Wright’s Copper Cream. Even if a piece is lacquered,
the lacquers break down eventually, requiring you to
remove the remaining lacquer. Try Wright’s Copper Cream
to remove it. If this doesn’t work, try boiling the
piece in water first, then polishing it with Wright’s
Copper Cream. Note that the copper under the lacquer
may only be a thin plating over a base metal; removing
the lacquer may also remove the copper layer, so proceed
with caution.
What is the environmental impact
of your polishes?
All Wright’s products are formulated for low environmental
impact. You will find that you need to use only a small
amount of our polishes, decreasing the impact even further.
Are your products dangerous?
Why are they marked “Keep out of reach of children?”
This is simply a general warning. All cleaning products
should be kept away from children, regardless of their
ingredients. Wright’s products are not toxic, but they
should not be ingested or come in contact with the eyes. |
